Abbreviated installation instructions, courtesy
of Nimisys:
1. Remove
bumper:
a. Remove
the under shield that attaches from the front of the
bumper to the lower radiator support.
b. Undo
and pull out the electrical connector in front of
the driverside tire. This connector is the connector
for all electrical items mounted on the bumper.
c. With
the shield removed, remove the screws attaching the
bumper to the inner wheel liner.
d. Remove
the 6 press pins by the hood latch. Pull the sides
of the bumper out from the car on both sides and
then lift it off from the front of the car. It
actually comes off pretty easily.
2. Remove
the grill insert & block off (cover) plates
3. Slide
in the fog lamps and bolt them in place.
4.
Reinstall the grill and bumper on the car.
The clips
you have to depress in order to remove that grill or
block off plates while still on the car are just
about impossible to reach. The problem lies in the
lower grill running between the fog lights, it has
to come off and it does not do so without a fight.
This also makes it far easier to replace the
driverside headlight bulbs.
|
This option assumes you
have foglights & want to get rid of them, or need
replacement info for the existing covers.
| Part Numbers: |
12786010 (LH)
12786011
(RH) |
|
|
| Approximate.
Price: |
$20
(each)
|
| Tech II
change req: |
? |
Typically found in USA, Great Britain, Canada,
Australia, The Netherlands, Japan, Russia.
I do not have any other information on retrofitting this.
If you would like to contribute by submitting info (any
info!), please
email me. |
|
S=Standard for this
model
O=Option available from
the factory
R=Option not available
standard or from the factory, but is retrofittable.
blank=Option not
available standard or from the factory, and is not
retrofittable. Or info not available. |
